75mm-160mm Plasitc double cabity PVC pipe production line

Plasitc double cabity PVC pipe production line is mainly used for the production of various pipe diameters and wall thickness plastic PVC pipes for agricultural water supply and drainage, construction water supply and drainage, cable laying, etc.

Production process of PVC pipe production line:
The mixing of raw materials for the plastic pipe extrusion line:PVC stabilizers, plasticizers and other auxiliary materials are added to the high-speed mixer according to the proportion and process.The materials are heated to the set process temperature by the self-friction of the material and the machine.The cold mixer reduces the material to 40-50C; this can be added to the hopper of the extruder.

Extruder part of plastic pipe production line:
A1: The extruder is equipped with a quantitative feeding device, so that the extrusion volume can be matched with the feeding volume, and the product can be extruded stably. Due to the characteristics of the conical screw, the feeding section has a larger diameter, and the heat transfer area and shear speed of the material are relatively large, which is conducive to the plasticization of the material.
A2: The small screw diameter in the metering section reduces the heat transfer area and the melt. The high shear speed enables the melt to be extruded at a lower temperature.
When the screw rotates in the barrel, it plasticizes the PVC mixture and pushes it towards the machine head, so as to achieve compaction, melting, mixing and homogenization; and to achieve the purpose of exhaust and dehydration.
A3: The feeding device and screw drive device adopt frequency conversion speed regulation, which can realize synchronous speed regulation.A4:The plastic pipe production line is composed of a conical twin-screw extruder, a vacuum setting table, a tractor, a cutting machine, a stacking frame, etc. The traction has two-claw, three-claw, four-claw, and six-claw traction methods. Saw blades or planets can be selected. The cutting mode can also be equipped with length counting and thickening devices, the unit has reliable performance and high production efficiency.

According to the requirements of customers, the equipment can be configured to produce spiral silencer pipe and core foam pipe unit.

Technical datas of plastic pipe production line:

Diameter Range(mm)
Extuder Type
Extusion Power(KW)
Max.Capacity(KG/H)
Max.Haul OffSpide(m/min.)
φ16-40Dual
GMTE51/105-VA18.5
18.5
120
10
φ20-63Dual
GMTE65/132-VA37
37
250
15
φ20-63
GMTE51/105-VA18.5
18.5
120
15
φ50-160
GMTE65/132-VA37
37
250
8
φ75-160Dual
GMTE92/188orGMTE80-150-VA110
110
450
6
φ63-200
GMTE65/132-VA37
37
250
3.5
φ110-315
GMTE80/156-VA55
55
450
3
φ315-630
GMTE92/188-VA110
110
800
1.2
φ510-1000
GMP130/26
160
100
1.3

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Please enter your message


      Open chat