SRL-Z 300/600 High speed Plastic PVC SPC WPC heating and cooling mixer machine

SRL-Z Series mixer unit is mainly used for assorting, mixing, coloring, drying of PE, PP, PVC, etc. also for the techinics, including drying, dehydration, etc. of engineering plastics such as ABS, polycarbonate, etc. before forming and processing, as well as in the mixing of phenolic. This unit can combine hot mixing with cold mixing. The materials after hot mixing can enter into cold mixer automatically to mix and cool, exhaust remnant gas to prevent materials from blocking effectively.

SRL series High speed Plastic PVC SPC WPC heating and cooling mixer machine is mainly used for PVC resin mixing, coloring, polyethylene, polypropylene particle coloring, drying, ABS, polycarbonate and other hygroscopic resin molding and drying before processing, phenolic resin mixing and other processes. Then it is cooled by cooling and stirring to prevent caking and the degradation of the hot mixed material, so that the additives in the hot material continue to infiltrate into the plastic resin, remove the residual gas in the hot mixed material, and can store the hot mixed material.

Features of High speed Plastic PVC SPC WPC heating and cooling mixer machine:

A1: Mixer barrel adopts 5mm stainless steel, bottom adopts 6mm stainless steel, it’s stronger and durable. some factory use only 3mm stainless steel, the cost is cheaper, but it’s not durable, the mixing barrel will wear off after some time.

A2:The frame of mixer made by 12mm channel steel which are stronger and more durable. some factory only use 10mm channel steel

A3:The bottom support steel plate adopts 20mm steel sheet, most factory only use 14mm thick steel.

A4:The Plastic mixer machine exhausing filter adopts very good air filter used for car, the air exhausting effect is much more better than cloth bag filter.

A5:The cooling mixer’s cooling belt is elaborately designed which can fast cool down the plastic materials.

A6:Tot mixer blades are well desgined which can save mixing time by 2mintues for one batch.

A7:Adopts Gemany oil seal, make sure no oil leakge.

Main Technical Parameters of High speed Plastic PVC SPC WPC heating and cooling mixer machine:

SRL–Z

Hot mixing/Cold mixing

Hot mixing/Cold mixing

Hot mixing/Cold mixing

Hot mixing/Cold mixing

Total volume

100/200

200/500

500/1000

800/1600

Valid volume

65/130

150/320

375/640

600/1050

Mixing slurry rotate speed

65/1300/200

475/950/130

430/860/60

370/740/50

Cooling mode of heating

Electric and self friction/water-cooling

Electric and self friction/water-cooling

Electric and self friction/water-cooling

Electric and self friction/water-cooling

Mixing time

6-10

6-10

6-10

6-10

Motor power

14/22/5.5

30/42/11

47/67/18.5

83/110/22

Dimension L*W*H (mm)

1950*1600*1800

4580*2240*2470

4600*3000*4050

5170*3200*4480

Weight

2200

3400

5800

9800

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Please enter your message


      Open chat