MF-500/600/800/1000 Plastic PE Pulverizer machine

Pulverizer blade; PVC cutter head is made of wear-resistant steel material, special tooth shape design, double the service life; the frequency of use of the cutter head is determined according to the material, usually grinding to400 tons needsto be replaced. (Depending on the wear of the blade); PE/PET/ HDPE/ LDPE/ABS/EVA/PC/FIBER grinding disc adopts SKD-11; tungsten steel; stainless steel plate material, special tooth shape design, double service life; cutter head The frequency of use is determined according to the material, and usually the grinding powder is 400 tons and needs to be replaced. (It depends on the wear of the blade);

PE Pulverizer machine Features of High-speed Pulverizer Miller
■ A1: Grinding chamber; cutter head and grinding plate are air-cooled and water-cooled, especially suitable for processing thermoplastic materials;
■ A2: The transmission device of the powder mill: adopts European- style belt wheel, high-speed operation is not loose, and it is more convenient for daily maintenance;
■ A3: Pulverizer blade; PVC cutter head is made of wear-resistant steel material, special tooth shape design, double the service life; the frequency of use of the cutter head is determined according to the material, usually grinding to400 tons needsto be replaced. (Depending on the wear of the blade); PE/PET/ HDPE/ LDPE/ABS/EVA/PC/FIBER grinding disc adopts SKD-11; tungsten steel; stainless steel plate material, special tooth shape design, double service life; cutter head The frequency of use is determined according to the material, and usually the grinding powder is 400 tons and needs to be replaced. (It depends on the wear of the blade);
■ A4: Mill knife adjustment system; combined with German technology, taking into account the convenience of customers, the knife adjustment of the cutter head needs to remove the movable cutter head, add or subtract washers, and adjust the grinding disc gap to ensure that there is no abnormal noise; The adjustment knife is distributed outside the grinding disc. According to the thickness of different materials, the bolts outside the grinding disc are adjusted at the same time. After the nuts are locked, the gap between the four bolts can be ensured to be consistent.
■ A5: Refueling device of the mill; in particular, an oil pump refueling device is added, which is convenient for users to refuel daily work wrthout stopping the machine;
■ A6: The mill is externally exhausted. The air volume reaches 1704m3/h, and most of the heat is taken away by the temperature difference between the inlet and outlet air. A small part of the heat is solved by water cooling. The inlet temperature of the cold water is required to be no more than 25℃, and the outlet water temperature is no more than 45℃. In summer the cooling tower can be used to circulate water to lower the temperature.
■ A7: Fully automatic, automatic feeding, discharging and sorting;

PE Pulverizer machine Main Techinical Parameter

Model MF400 MF500 MF600 MF800
Diameter of blade 400mm 500mm 600mm 800mm
Main motor power 30kw 45kw 55kw 75kw
Blade material SKD-11 or D53 SKD-11 or D53 SKD-11 or D53 SKD-11 or D53
Capacity 100-150kg/h 250kg/h 350kg/h 500kg/h
Spread the love

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Please enter your message


      Open chat