MF-800 Stainless steel Plastic SBS pulverizer with SKD-11 grinding disc

Structural Description of SBS Pulverizer：
The plastic pulveirzer customized by Beisu is composed of base parts； transmission parts； outlet parts； box parts；electrical instrument control cabinets etc.
Base parts:The upper part of the base is equipped with a main motor, a transmission part and a box. The main motor and transmission parts are connected by a belt. In order to prevent the belt from loosening, two adjustment screws are installed on the upper side of the base; after the fixing nut on the motor plate is loosened, the belt can be tightened by turning the screw.
Transmission parts:The transmission parts (except the motor) are installed in the pot seat and the base under the box body.The bearing seat is made of cast steel, and the main shaft and bearing are installed inside, and three skeleton seal rings are installed at the same time to prevent oil leakage and external dust intrusion; the end of the main shaft is equipped with a rotary cutter body, and the two rotary cutters are tightened with bolts. It is fixed on the cutter body, and when the main engine is started, the rotary cutter is driven to rotate by the belt pulley.
Pot parts:The inner surface of the pot body and the bottom of the pot is finely polished to ensure that it does not stick to materials and prevents corrosion. The pot body is divided into two parts, the upper pot body and the lower pot body, and the joints between the two are fastened with rocker bolts; when it is necessary to clean the inside of the pot body and replace the rotary knife, the bolts can be loosened, and the upper pot body can be gently pushed along the vertical axis Rotate horizontally so that the lower pot body is exposed to the outside for easy maintenance and cleaning.

Technical datas of SBS pulverizer: