Plastic crusher grinding machine for PVC/SPC/WPC board sheet profile

The working principle of SWP plastic crusher:
The main working part of the SWP series plastic crusher is the rotor with hammer. The rotor consists of a main shaft, a disc, a hinge pin and a hammer. The sieve plate is located under the rotor, and the motor drives the rotor to rotate at high speed through the rotor. The belt, the rotor has a series of hammers. When the material enters the working area, the material is crushed by high-speed rotation, and the crushed product that meets the required size can be discharged through the outlet to become the final product, and the sledgehammer brings the product back to the crushing area through the hammer until it reaches the required size.

Features of SWP plastic crusher:
A1: The special long inclined hopper design ensures that there is no need to cut sheets and profiles, and realizes one-time continuous feeding. Large inlet, high crushing cavity, suitable for material hardness, agglomeration, and less product powder.
A2: Imported high-quality tool steel, specially made knives, are particularly durable. The knives are installed and designed to be retractable and adjustable. After being dull, they can be re-sharpened for many times. After repeated use, they have a long service life.
A3: The movable cutter seat is designed as a stepped scissor equipment, which makes the chip force decompose, causing the chip force to increase exponentially. The moving knife seat is made of T7 high-quality steel material, with reasonable rigidity and flexibility, and is not easy to break or wear. It is fastened with high-strength (8.8) steel screws, and the structure is solid and durable.
A4: The main body of the machine is made of high-quality structural materials, and long-term use will not affect the mechanical properties of broken materials. The axis of the main body and the double end faces are also processed by high-precision coordinates in turn to ensure concentricity and verticality. Each component is set with a reference hole, and the surface is roughed and refined twice. Flow processing technology, strong interchangeability of components High precision.
A5: Assemble heavy-duty bearings and set up a double-layer sealing device in the crushing chamber. The movable knife seat and the main shaft are assembled by heat sealing. The technology is advanced. The matching gap of the movable knife is less than 0.05MM, which prevents the broken powder from leaking into the bearing seat and aggravating the motor load. , to overcome the key failure factors of the crusher.

Technical parameters of SWP plastic crusher: