- [email protected]
- 86-512-58968376
Plastic heating and cooling mixer stainless steel blade paddle widely used in mixing, drying, coloring for all kinds of resin such as PVC, PP, PE, ABS, PC, etc.
The size of various plastic mixer blades paddle:
A1: SHR-10L high-speed mixer conventional accessories and blade configuration: SHR10A plastic mixer round bottom blade, barrel diameter 250mm, blade fillet R27mm, total height 55mm. The diameter of the inner hole of the blade is 32mm, and the keyway is 10mm. The material is 304 stainless steel, and the diameter of the discharge port is 50mm.;
A2: SHR25A high-speed mixer conventional accessories and round bottom blades, the barrel diameter is 330mm, the blade fillet is R50mm, and the total height is 90mm. The diameter of the inner hole of the blade is 40mm, and the keyway is 12mm. The internal thread of the parallel cap is M24X2 (reverse). The material is stainless steel;
A3: SHR100A plastic mixer blades, the diameter of the barrel is 515mm, the rounded corners of the barrel are R135mm, the total height of the blade is 130, the inner hole of the blade is 60mm, and the keyway is 18mm. The material is stainless steel, wear-resistant steel;
A4: SHR200A plastic mixer blades round-bottom blades, the barrel diameter is 670mm, the barrel rounded corner is R145mm, the total blade height is 142mm, the inner hole of the blade is 60mm, and the keyway is 18mm. Material is 304 stainless steel, wear-resistant steel;
A5: SHR300A high-speed mixer with round bottom blades, the barrel diameter is 750mm, the barrel rounded corners are R180mm, the total blade height is 170mm, the inner hole of the blade is 75mm, and the keyway is 20mm. The material is 304 stainless steel, the bearing is 6319 one, 6317 two deep groove ball plane bearings, the cover cylinder is 80*65mm, the discharge port cylinder is 80*300mm, and the discharge port diameter is 170mm;
A6: SHR500A high-speed mixer conventional accessories and round-bottom blades, the barrel diameter is 870mm, the barrel round corner is R200mm, the total blade height is 205mm, the inner hole of the blade is 80mm, and the keyway is 22mm. The material is 304 stainless steel, 201 stainless steel and wear-resistant steel, bearing 6321 one, 6319 two deep groove ball plane bearings, pot cover cylinder 125*65mm, discharge port cylinder 100*320mm, discharge port diameter 200mm;