Plastic mixer dryer machine for PE/PPR pipe prodcution line

Structural features of plastic mixer dryer:
plastic mixer dryer the first stage quickly delivers the raw materials into the barrel, and the second stage quickly raises the raw materials to the upper end of the barrel and throws them in an umbrella shape, while the hot air is discharged from the barrel.
The center of the lower part of the body blows out to the surroundings, and smoothly penetrates the raw materials from the bottom to the top from the gap of the moving raw materials for a dynamic drying process of comprehensive heat exchange. A large amount of raw materials can be uniformly mixed in a short time.

Features of plastic mixer dryer:
A1: The machine occupies a small area, low energy consumption, large capacity, labor-saving, convenient operation, time-saving and labor-saving, and the mixing effect is fast and even. Spiral mixing is used for feeding, which is convenient for feeding. Workers directly stand on the ground to feed the material (you can also use the fan to send the plastic particles directly into the barrel from the pelletizer).
A2: The materials in contact with the raw materials are all made of stainless steel, which is easy to clean and avoid rust.
A3: Stirring and drying are synchronized, because the material keeps flowing during the drying process, the heat penetrates evenly, the drying time is short and it is not easy to form quickly;
A4: There are many models, large capacity, and one performance load: 300kg to 8T.
A5: The heating type machine has two-in-one drying and mixing functions. When it is not necessary to dry, just turn off the heating switch and the fan switch, and it can be used for plastic mixing and homogenization. One machine has two functions.
A6: Automatic operation timing, overload protection, feeding limit alarm and other functions; protection device to ensure safe operation.

Technical datas of of plastic mixer dryer: