20mm-63mm Plastic pipe machine PP PE HDPE pipe making machine line

Plasitc PE pipe machine uses special polyethylene as raw material to be extruded by a plastic extruder at one time. It is used in urban water supply pipe networks, irrigation diversion projects and agricultural sprinkler irrigation projects, transportation systems in the food and chemical fields, ore and mud transportation systems, and landscaping pipes. Mesh, replacement cement pipes, cast iron pipes and steel pipes are especially suitable for plastic pipes that are resistant to acid and alkali and corrosion.

Process Flow of PP PE HDPE pipe making machine line:

Raw material+ Master Batches → Mixing → Vacuum Feeder →Plastic Hopper Drier→ Single screw extruder →Co-extruder for color string & Multi Layers → Mould → Vacuum Calibration Tank → Spray Cooling Water Tank → Haul-off → No Dust Cutter → Double/Single disc Winding/ Stacker → Final Product Inspecting &Packing

Features of PP PE HDPE pipe making machine line:
A1: The PE pipe production line is a spiral die head designed for HDPE and PE large-caliber thick-walled pipes. The die has the characteristics of low melt temperature, good mixing performance, low cavity pressure, and stable production.
A2: The PE pipe production line adopts a proprietary sizing and cooling system, and uses water film lubrication and water ring cooling to meet the requirements of HDPE and PE materials to ensure that the high-speed production of thick-walled pipes is stable in diameter and roundness.
A3: The PE pipe production line adopts a specially designed multi-stage vacuum sizing box that controls the vacuum degree to ensure the dimensional stability and roundness of HDPE and PE pipes. The extruder and tractor adopt imported brand-name speed governors to move and control, with good stability , High precision and high reliability.
A4: The operation and time of the PE pipe production line are programmed by PLC. It is equipped with a good man-machine interface. All process parameters can be set and displayed through the touch screen. A special extruder for the marking line can be assembled to produce products that meet the requirements of national standards. Color-coded pipes.
Detail Specification of PE pipe machine:
• To feed material into extruder
• World famous brand electrical component such as Siemens, Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
• Bimetallic screw and barrel;
• Intelligent PLC controlling system with human-friendly interface.
Die head
• 40Cr material
• Complete set include extrusion die head, Slotting & water ring type calibration sleeve
• Apply to PE/PP, co-extrusion, multi-layers co-extrusion etc
Vacuum calibration tank
• Include full set of vacuum and water pump
• length from 6m-9m
Haul off
• Upper and lower caterpillar is driven separately by the frequency inverter
• Fast change type pads
• Tracking cutter or Non-dust cutter, Blade rotates around pipe and cut off pipe with smooth surface.
• Synchronous control
•Stainless steel 304 as touching material
•Discharge driving by air cylinder
Spread the love

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Please enter your message

      Open chat