Plastic Pulverizer

Plastic Pulverizer
Application of high speed mill:
The high-speed and high-efficiency pulverizer manufactured by Beisu Machinery is especially suitable for TPU, LLDPE, PVC, PE, PET, EVA, PP, PA, rubber, and various rigid, soft, elastomer, low-temperature materials, and film materials. , Sheet thermoplastic materials. According to the classification of the grinding materials, the mills are mainly divided into two categories: rotor (turbine) mills and disc mills.
The working principle of the high-speed mill:
The high-speed rotation of the grinding disc driven by the main shaft of the plastic pulverizer collides with the fixed cutter disc, cutting the material into powder (without sieve). The ground fine powder is brought into the vibrating screen along with the circulating air of the blower for sorting. The coarse material falls back to regrind, and the qualified fine powder enters the finished product storage with the cyclone and is discharged through the powder outlet pipe. That is the finished product. The air is discharged from the dust collector.
Image

Plastic pulverizer machine Detail display

plastic pulverizing machine
Plastic pulverizer
Features of Plastic pulverizer machine
For materials: plastic mills are widely used in plastics, building materials, chemical industry, such as PVC moldings, PVC skirting, PVC gusset, pipe material, plastic steel, threading pipe, water pipe, down pipe, trademark paper, Grinding of various plastic materials such as rubber, leather and plant fiber. The PVC line grinding machine independently developed by Beisu Machinery-PVC skirting machine features: automatic feeding, automatic feeding control, automatic pulse dust removal, automatic current adjustment, one-button start control system, eliminating manpower Operation, no dust, power saving, environmental protection, one person to see more than one machine, each ton of material reduces gray hair material about 15%, can be milled (PVC small white tube, plastic steel profile, gray board, gray tube, decorative gusset, etc. PVC hard Quality materials) high output, high-end products, high-tech! The PVC environmentally-friendly mill has been continuously updated and used, and it has been used until now. Our mill has made a major improvement in the structure. The output of Beisu Machinery PVC plastic mill is also increasing, and the fineness is also The previous fixed number has evolved to the present adjustable.
Uses: Suitable for PVC hard material grinding, such as PVC baseboard, PVC decorative line, PVC small white tube, plastic steel profile, gray board, gray tube, decorative gusset and so on. High safety factor, good operation, fast production speed, thickness can be adjusted according to needs, eliminating the laborious operation procedures, reducing losses, saving you unnecessary waste!
Environmental protection: Environmental protection standards, no dust emissions, low noise, 30% less electricity than similar mills on the market, 40% higher than similar products.
Advantages: no dust, low noise, large output, fast speed, energy saving, environmental protection, automatic, saving labor, automatic feeding, automatic feeding, automatic dust removal, automatic weighing, computer one-button start operating system, is currently The domestic hot-selling PVC mill products speak with quality and high quality.
Configuration: 37KW main engine motor, dust removal fan adopts 4KW, vibration feeding 0.55KW. Screw feeder motor 2.2kw, vibrating screen 0.75kw, automatic packaging, vibration feeding device.
For materials: plastic mills are widely used in plastics, building materials, chemical industry, such as PVC moldings, PVC skirting, PVC gusset, pipe material, plastic steel, threading pipe, water pipe, down pipe, trademark paper, Grinding of various plastic materials such as rubber, leather and plant fiber.
Plastic pulverizer machine Main Technical parameters
Model SMF-400 SMF-500 SMF-600 SMF-800
Motor power(kw) 30 37 45 55
Blower power(kw) 1.5 3 5.5 11
Dust collector 6 9 16 24
Total power(kw) 31.5 42 52 90.5
Feed diameter(mm) <18 <18 <18 <18
Discharge size(mesh) 10-80 10-80 10-80 10-80
Capacity(kg/h) 100-150 200-250 300-400 400-500
Dimensions(mm)(L×W×H) 2000×1800×2600 2500×2000×3000 3200×2600×3200 3500×2400×4000
Plastic pulverizer machine
The high-speed and high-efficiency pulverizer manufactured by Beisu Machinery is especially suitable for TPU, LLDPE, PVC, PE, PET, EVA, PP. PA, rubber, and various hard, soft, elastomer, low-temperature materials, andfilmmaterials

What We Offer

Spare parts for pulverizer

Plastic Pulverizer Grinder Mill Blade Knife is mainly installed on the pulverizers, especially for PVC PP ABS PS PE. Plastic pulverizer blade has segment grinding blade, whole body grinding disc. Special technology can be adopted on the blade of the pulverizer, such as tungsten plating, TIALN, this blade has a long life, which is 2 to 3 times the life of the ordinary blade.

plastic pulverizer disc blade

plastic pulverizer disc blade

plastic pulverizer rotor blade

plastic pulverizer rotor blade

Plastic Pulverizer FAQ

What can you do with high speed plastic Pulverizer?

Putting raw materials into grinding chamber, through the classification and cooling of wind and water, people can get 40-100 meshes rubber powder. High-speed plastic pulverizer is the particular equipment for recycling disused insignificant materials in producing and grinding heat-sensitivity plastic such as PVC, PE, PP, PS, ABS, PET and so forth.

Which is the best Scheer Pulverizer for plastic?

In the pulverizers segment, MAAG offers a wide range of Reduction Engineering Scheer pulverizers for different throughput ranges and applications. Our state-of-the-art product portfolio is based on 25 years of research, development, ongoing system improvement, and in-depth know-how in the grinding of plastics and other materials.

What kind of motor does a PVC Pulverizer use?

The H1D 250 boasts a 50 HP mill motor with a 3 sifter deck capable of producing up to 600 lb/hr for LLDPE and up to 700 lb/hr for PVC. The H1D 250 is proof that Orenda makes smaller faster and cooler. Our entry level model, utilizing the AirForce technology proves that good things really do come in small packages.

What is plastic pulverizer machine?

Digicon Make Pulverizer is designed for pulverizing of semi-rigid, brittle and impact resistance materials where a powdered product is required. Granulated Plastic materials are fed via vibratory feeder into the Mill. High speed Mill grinds the materials and suction system draw the materials from mill.

How does a plastic pulverizer work?

A pulverizer takes pellets in one end and produces powder at the other end. The pulverizer features a direct-drive mill to utilize 100 percent of the power from the 150-horsepower motor. The motor is driven by an inverter drive mounted into the control panel of the machine

What is pulverizer used for?

A pulverizer or grinder is a mechanical device for the grinding of many different types of materials. For example, a pulverizer puritch is used to pulverize coal for combustion in the steam-generating furnaces of coal power plants.

About Beisu

BEISU machienry is professional in plastic pipe extrusion machine, plastic profile extrusion line, plastic sheet extrusion line, and plastic recycling machine with them self R&D technology team more than 10 years. All machines can be customized by your requirements, we can supply the production line drawing and suggestion for your factory before our cooperation, and we can supply our technical support with free formula after we cooperation.
Our engineer can install the plastic extruders or plastic extrusion production line for you with the reasonable salary, and we can supply training support for your staffs if you required.
We can arrange fast shipment for you, as our staffs have more than 10 years; working experience in their professional field, and we always stock some regular main parts in our warehouse.

Why choose Beisu?

1000 m2

Covering an area of 1000 m2

10 YEARS

10 years of production experience

20,00 UNITS

with an annual output of 20,00 units

CE

Has obtained CE certification

OEM

Provide OEM services

R & D

Two excellent equipment R&D teams

Beisu main products

BEISU machinery and equipment recommendation: PVC/PE/PP pipe production line, PVC/PE wood plastic production line, PVC profile/profile production line, PVC/PP/PE/ABS sheet/sheet production line, PVC edge band production line and mill, High-speed mixer (group), crusher, sharpener, shredder, tractor, winder, cutting machine and other plastic auxiliary machinery.

  • Plastic Pelletizing Line

  • Plastic Pipe Extrusion Line

  • Plastic Profile Extrusion Line

  • Plastic Shredding Crushing Machine

Please enter your message


    Open chat