SMF-600 Plastic rigid PVC/SPC/WPC recycling crushing milling machine with alloy steel rottor blades

SMF-600 Plastic rigid PVC/SPC/WPC recycling crushing milling machine with alloy steel rottor blades is utilized to grind rigid un plastisized PVC pipe, PVC profile,PVC board scraps into fine powder for recycling production waste in PVC plastic industry, it’s necessary machine for UPVC plastic factory.

Characteristics of  Plastic rigid PVC/SPC/WPC recycling crushing milling machine:

A1.With water cycle and wind cooling, Plastic rigid recycling crushing milling machine can be applied into processing heat sensitive material.

A2.With the tail-wagging air stream (partly eddy flow) produced by the tail-wagging of the main shaft capstan of the machine, the input tail-wagging materials collide strongly with the board and the cutting blade, and was grinded into powdery (without sieving).

A3.Both the board and the cutting blade are made of abrasion-resistant steel, with excellent performance after heat treatment.

A4.With severeness of framework, the volume of the machine is quite small. If you open door closure, you can maintain it. PVC Pulverizer is completely airproof and without any dust leakage.

A5.With winding reclaiming equipment, the machine is features by cooling materials evenly, quick cooling and some other characteristics.

A6.The new disc design is used, high-yield, strong resistance and the life of this grinding disc is double than the ordinary.

A7.The use of newly designed professional bearings, and reach a high rotation rate. At the same time using only one drive motor, to ensure the efficient grinding crash, which greatly saves the time and operation of machinery and control engineering.

A8.Installation and maintenance easy, open the door to cover clean-up.

A9.Milling process of the whole seal, without dust leakage.

A10.Full automatic feeding, the materials and sorting.

A11.Grinding gap adjustment is simple, just use the plug-foot bolts and adjustments can be fine-tuning (10-120 mesh).

A12.The host used the water and wind double system; Rational design of smaller cross-section of the grinding chamber, grinding is almost flat vertical surface. Material entered the grinding chamber as soon as caught, groud, and then rapidly removed, which eliminates the grinding chamber of the surge in materials, heating materials to avoid decomposition, resulting in improved production.

Technical datas of Plastic rigid PVC/SPC/WPC recycling crushing milling machine:

Model SMF-400 SMF-610 SMF-800
Blade disc size 400mm 610mm 800mm
Blade Disc quantity 2 pieces 2 pieces 2 pieces
Shaft rotary speed 4500 rpm 4200 rpm 3700 rpm
Main motor power 30kw 45kw 55kw
Blower power 3kw 5.5kw 7.5kw
Flow valve power 0.75kw 0.75kw 1.1kw
Powder size 10-100mesh 10-100 mesh 10-100 mesh
Cooling method Air cooling & water cooling Air cooling & water cooling Air cooling & water cooling
Capacity 150kg/h (PE)

80kg/h (PP)

200kg/h (PVC)

250kg/h (PE)

160kg/h (PP)

350kg/h (PVC)

350-400kg/h (PE)

200-250kg/h (PP)

500kg/h (PVC)

Machine size 2500*2000*3000mm 2800*2300*3000mm

3200*2800*3200mm

Spread the love

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Please enter your message


      Open chat