SMF-500/600/800/1000 Plastic PVC SPC WPC recycling grinding milling machine with rottor knife blades

SMF-600 Plastic PVC WPC SPC grinding milling machine manufacturer with rottor knife blades is 400mm and the maximum is 800mm, which belongs to the turbo-type pulverizer series. Mainly used in the field of hard PVC / SPC / WPC recycling, such as the recycling of defective PVC pipes, profiles, plates and leftover materials.

Features of PVC WPC SPC grinding milling machine:
(1) Compared with similar mills, the output is greatly improved (20%-50% increase) at the same power, and energy consumption is saved.
(2) A dust collector is added, which effectively reduces dust pollution.
(3) The discharge of the main fan reduces the labor intensity of the operators.
(4) The door cover of the main machine can be opened, which is convenient for maintenance and tool replacement.
(5) The use of wind and water double cooling can better reduce the working temperature in the machine body, and the materials developed are not easy to change. At the same time, it is also conducive to the grinding of heat-sensitive plastics. Part of PE and ABS can be ground.

The working principle of PVC WPC SPC grinding milling machine:

A1: The working part of the machine is the cutter head. The high-speed particles are partially crushed after impacting the tooth plate and drawn out by suction, while the larger particles continue to impact and are drawn out after crushing. This reduces the load on the cutter head, improves the grinding efficiency, and enables the powder to be evenly cooled.

A2: Low temperature is the main advantage of this machine. In terms of thermal power equivalent: it is converted into 860 kcal of heat per hour after the work is done. This machine is external ventilation. The air volume reaches 50m/KW, and most of the heat is taken away by the temperature difference between the inlet and outlet air.

A small part of the heat is solved by water cooling. The inlet temperature of the cold water is required to be no more than 25°C, and the outlet water temperature is no more than 45°C. In summer, the cooling water flow should be appropriately increased to lower the temperature.

PVC SPC WPC grinding milling machine

Parameters of PVC WPC SPC grinding milling machine:

Model 400 500 600 800
Motor power(kw) 22 37 45 55
Blower power(kw) 3 3 5.5 11
Dust collector 4 9 16 24
Total power(kw) 31.5 42 52 90.5
Feed diameter(mm) <18 <18 <18 <18
Discharge size(mesh) 10-80 10-80 10-80 10-80
Capacity(kg/h) 100-150 200-250 300-400 400-500
Dimension(L*W*H) 2000*1800*26000 2500x2000x3000 3200x2600x3200 3500x2400x4000

Beisu machinery is a professional manufacturer and supplier of spc pulverizer machine , plastic grinding machine, wpc milling machine, wpc grinding machine, spc grinding machine, pvc pulverizer machine, pvc milling machine, spc milling machine, plastic milling machine

Spread the love

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Please enter your message

      Open chat