Plastic high-speed mixer is mainly used for PVC material, PE granulation, filling master batch granulation, polyethylene, polypropylene, polyvinyl chloride and other ingredients, mixing, coloring, drying and ABS polycarbonate and other engineering plastics before molding processing. Drying, devolatilization and other processes can also be used for mixing phenolic resins.
The structure of plastic high-speed mixer:
The hot mixing part is composed of plastic mixer machine. The pot body is welded by stainless steel, the inner surface is extremely smooth and hard, and has the characteristics of wear resistance, corrosion resistance, and not easy to stick.
Features of plastic high-speed mixer:
A1: The plastic mixer consists of mixing pot, pot cover, dismantling plate, transmission parts, unloading device and other parts.
A2: Plastic mixer mixing pot: multi-layer structure, divided into inner layer, outer layer and interlayer, the inner layer is welded with stainless steel, the barrel wall and barrel bottom are made of stainless steel, the arc-shaped pot bottom, the inner surface is smooth and hard, wear-resistant , Corrosion-resistant, not easy to stain. The pot wall is made of 304 stainless steel for durability.
A3: Plastic mixer lid: Made of cast aluminum, the inner surface is finely turned and polished, with fine workmanship. The exhaust port is equipped with a filter element device, and the feed port is equipped with a hopper and a discharging insert.
A4: Plastic mixer heating: electric heating is adopted, heat is transferred through heat transfer oil, the friction between the surface of the impeller and the material and the thrust of the side against the material make the temperature rise.
A5: Transmission parts of plastic mixer: The stirring paddle is made of stainless steel and specially processed by machinery, which is wear-resistant and corrosion-resistant.
A6: Spindle of plastic mixer: finely turned, finely ground, quenched and tempered, with fine workmanship. Three seals are adopted, followed by tetrafluoroethylene, gas, and skeleton oil seals, which do not leak powder. The bearing adopts the D-class bearing of the three major domestic factories, Wahalo.
A7: High-speed mixer discharge device: made of aluminum alloy, equipped with a pneumatic discharge door, automatic discharge. The cylinder and the material gate are connected by one line, which is reliable in pressing and has good sealing performance.
Technical datas of plastic high-speed mixer:
| Model | Total volume (L) | Effective volume (L) | Motor power/heating power (kw) |
| SHR5A | 5 | 3 | 1.1 |
| SHR10A | 10 | 7 | 3 |
| SHR25A | 25 | 18 | 5.5 |
| SHR50A | 50 | 35 | 7/11/3 |
| SHR100A | 100 | 75 | 14/22/6 |
| SHR200A | 200 | 150 | 30/42/9 |
| SHR300A | 300 | 225 | 40/55/9 |
| SHR500A | 500 | 375 | 47/67/12 |
| SHR800A | 800 | 600 | 60/90/15 |
| SHR1000A | 1000 | 750 | 110/160/28 |
