- [email protected]
- 86-512-58968376
The high-speed mixer is mainly used for the mixing of calcium powder; the mixing of PTFE; the mixing of PVC; the mixing of kaolin; the mixing of ternary lithium battery materials; the lithium iron phosphate battery and so on. The mixer can both heat and cool. Especially like rigid PVC products (such as rigid boards, transparent boards, foam boards, profiles, hard pipes and pipe fittings, etc.), electric heating or self-friction heating high-speed mixers should be used for plastic modification and plastic drying in the plastics industry. . However, for lithium battery materials, PTFE and other industries, it can be cooled and mixed with water according to the requirements of the material.
The commonly used national standard volumes of high-speed mixers are 5L, 10L, 50L, 100L, 200L, 500L, 800L, 1000L, 1300L and other specifications.
The structure of Plastic mixture machine :
The machine is composed of mixing pot, pot cover, dismantling plate, transmission parts, unloading device and other parts.
A1: Mixing pot: multi-layer structure, divided into inner layer, outer layer and interlayer, the inner layer is welded with stainless steel, the barrel wall and barrel bottom are made of stainless steel, the arc-shaped pot bottom, the inner surface is smooth and hard, wear-resistant and corrosion-resistant , not easy to stick to the material. The pot wall is made of 304 stainless steel for durability.
A2: Pot lid: Made of cast aluminum, the inner surface is finely turned and polished, with fine workmanship. The exhaust port is equipped with a filter element device, and the feed port is equipped with a hopper and a discharging insert.
A3: Heating: Electric heating is adopted, and heat is transferred through heat transfer oil. The friction between the surface of the impeller and the material and the thrust of the side against the material make the temperature rise.
A4: Transmission parts: The stirring paddle is made of stainless steel and specially processed by machinery, which is wear-resistant and corrosion-resistant.
A5: Spindle: After fine turning, fine grinding, quenching and tempering treatment, fine workmanship. Adopt three seals, followed by tetrafluoroethylene, gas, skeleton oil seal, no powder leakage. The bearing adopts the famous Wahalo D-class bearing.
A6: High-speed mixer discharge device: made of aluminum alloy, equipped with pneumatic discharge door, automatic discharge. The cylinder is connected with the material gate in one line, which is reliable in pressing and has good sealing performance.
Technical datas of Plastic mixture machine :
| Model | Effective volume(L) | Motor power(KW) | Shaft speed(r/min) | Heating method(KW) | Discharge method |
| SHR-5A | 3 | 1.2 | 1400 | Self heating | manual |
| SHR-10A | 7 | 2.2/3.2 | 750/1500 | Self heating | manual |
| SHR-25A | 17.5 | 5.5 | 1440 | Electric heating 2kw | Manual or cylinder |
| SHR-50A | 30 | 7/11 | 750/1500(510/1013) | Electric heating 4kw | |
| SHR-100A | 75 | 14/22 | 525/1050(650/1300) | Electric heating 6kw | |
| SHR-200A | 150 | 30/42 | 490/980 | Electric heating 6kw | |
| SHR-300A | 225 | 40/55 | 480/964 | Electric heating 9kw | |
| SHR-500A | 375 | 47/67 | 441/886 | Electric heating 6kw | |
| SHR-800A | 560 | 83/110 | 330/660 | ||
| SHR-200C | 150 | 30/42 | 650/1300 | ||
| SHR-300C | 225 | 47/67 | 475/950 | ||
| SHR-500C | 375 | 55/75 | 500/1000 | ||
| SHR-800C | 560 | 83/110 | 330/660 | ||
| SHR-1000C | 700 | 83/110 | 330/660 |
