SJ25/30/50 Plastic extruder machine PE/PP/PPR/PC/ABS single screw laboratory extruder

Plastic laboratory extruder is suitable for the mixing and processing experiment of engineering plastics, modified plastics, waste plastics, and masterbatch. It has the functions of plasticizing homogenization, coloring proofing, filling modification and so on. Equipped with different types of heads, molds, and auxiliary machines can be used for plastic profiles, pipes, sheets, and pellet production. It can also be used for co-extrusion of pipe marking lines.

Technical points of single screw laboratory extruder:
A1: Screw diameter: 20, 25, 30 optional
A2: Screw speed: 0-80rpm frequency conversion speed regulation
A3: Length-to-diameter ratio: 1:25, other length-to-diameter ratios (10~30 times) are optional
A4: Screw material: 38CrMoAIA chromium-molybdenum alloy special tool steel, the surface is treated by quenching and tempering, nitriding, chromium plating, polishing and super-finishing grinding process, hardness HRC55~60, roughness Ra<0.4um, nitride layer depth>0.6 mm
A5: Barrel material: 38CrMoAIA chromium-molybdenum alloy special tool steel, the surface is treated by quenching and tempering, nitriding, chromium plating, polishing and super-finishing grinding process, hardness HRC55~60, roughness Ra<0.4um, nitride layer depth> 0.6mm
A6: Heating zone: mica heater in zone 4 of the barrel, heater in zone 1 of the machine head, each zone is equipped with copper radiating fins and covered with a stainless steel safety wind hood
A7: Cooling device: 4 sets of multi-blade fans super quiet and forced air cooling
A8: Reducer: Hard tooth surface reducer, speed ratio 18:1, tooth surface fine grinding, large load torque, low noise
A9: Melt pressure: 0-35Mpa, accurately monitor pressure fluctuations and flow changes, that is, the difference between the pressure before filtration and the pressure after filtration
A10: Filter cover: (5-40) micron pore size, in line with relevant standards
A11: Drive power: 2.2Kw
A12: Power supply: AC380V.50Hz three-phase five-wire

single screw laboratory extruder

Technical datas of Plastic single screw laboratory extruder:

Model Screw diameter(mm) Rotational speed(rpm) Motor power(kw) Motor type Output(kg/h) Center height(mm)
SJ-25/25 25 25 1.5 AC 3 1000
SJ-30/25 30 50 2.2 AC 5 1000
SJ-65/30 65 20-120 45 AC 150 1000
SJ-65/33 65 20-120 55 AC 200 1000
SJ-75/33 75 12-120 75/90/110 AC 350 1000
SJ-90/33 90 12-120 160 AC 450 1100
SJ-120/33 120 10-80 250/315 AC 850 1200
SJ-150/33 150 7.5-75 315 AC 1200 1300

We also provide other models of Plastic Extruder Machine, welcome to buy.

For more information please contact:

E-mail: batista@beisu -Extension com
Whatsapp: +86-13913294389
Website: https://www.beisumachine.com/

Spread the love

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Please enter your message


      Open chat